Product Grade:
ST 37.2 / ST 44.2 / ST 52.3 or Equivalent Grades
Hot Rolled Steel Plates
Product Type:
Mild Steel
Product Thickness(MM):
1.4 ~ 20 mm & above,
Product Thickness(MM):
1.4 ~ 20 mm & above,
Product Width(MM):
4M x 8M, 1.5 x 6M, 2M x 6M, 2M x 12M, 2.5M x 12M, 3M x 12M
Product Grade:
ST 37.2 / ST 44.2 / ST 52.3 / S355 JR or Equivalent Grades
Cold Rolled Steel Coils
Product Type:
Mild Steel
Product Thickness(MM):
0.50 mm - 1.50 mm
Product Thickness(MM):
0.50 mm - 1.50 mm
Product Grade:
ST 12
Direct Reduced Iron (DRI)
Direct Reduced Iron (DRI)
It also called sponge iron, is produced from the direct reduction of iron ore (in the form of lumps, pellets, or fines) to iron by a reducing gas or elemental carbon produced from natural gas or coal.Direct reduced iron (DRI) is technically defined as iron ore which has been reduced to metal without melting it.
Hot Briquetted Iron (HBI)
Hot Briquetted Iron (HBI):
Hot Briquetted Iron (HBI) is a relatively new product, developed in the past 25 years, as a supplement for pig iron and scrap in electric furnace steel mills. It is a compacted form of direct reduced iron (DRI), which facilitates its handling, storage, and use. Today HBI is produced in the form of briquettes at high temperature and pressure with roller presses. Alternative briquette sizes and shapes have been tested in several Plants.
Steel Slabs
Steel Slabs:
A slab is a length of metal that is rectangular in cross-section. The slab is created directly by continuous casting or indirectly by rolling an ingot on a slabbing mill. Slabs are usually further processed via flat rolling, skelping, and pipe rolling. Common final products include sheet metal, plates, strip metal, pipes, and tubes
Steel Billets
Steel Billets:
A billet is a length of metal that has a round or square cross-section, with an area less than 36 in2 (230 cm2). Billets are created directly via continuous casting or extrusion or indirectly via hot rolling an ingot or bloom. Billets are further processed via profile rolling and drawing, Final products include bar stock and wire
